Range Of Product:

Capacity - Up to 100 M3/HR
Head - Up to 60 Meters

Application :

• De-watering,
• Effluent, chemicals from underground tanks and underground solvent tanks DRUM UNLOADING,
• Solvent Transfer.
• Potable water.

Self Priming Centrifugal Pumps Metallic – II

     

Material of Construction

• Casing : Cast iron / SS - 304 (CF - 8) SS - 316 (CF - 8M)
• Impeller : Cast iron / CF - 8 / CF -8m / Bronze
• Diffuser : Cast iron / CF - 8 CF - 8 M / Bronze
• Shaft : EN- 8 / SS - 304 / SS - 316
• Sleeve : SS - 410 / SS - 304 / SS - 316 / Bronze
• Bearing Housing : Cast iron
• Sealing : TIWA / carbon - Ceramic Seal / TC-TC Seal

Technical Details

Model	HP x RPM	PIPE SIZE	Total Head In Meters																		Sold Hand-ling Size(MM)
			6	8	10	12	14	15	16	18	19	20	22	24	25	26	28	30	32	34
			Descharge Liters Per Second
RSP-0	1 x 2900	40 x 40	5.2	4.5	4	3.4	2.2	1.1	-	-	-	-	-	-	-	-	-	-	2.4	14 mm	7.0
RSP-1H	2 x 2900	40 x 40	-	-	604	5.6	4.8	4.4	3.9	2.7	1.8	0.8	-	-	-	-	-	-	3.4	18 mm	8.5
RSP-2H	3 x 2900	50 x 50	-	-	9.1	8.0	8.0	4.6	7.1	6.3	5.9	5.2	3.9	2.5	1.4	-	-	-	4	20 mm	10.5
RSP-3L	5 x 2900	80 x 80	19.7	19.2	18.8	17.8	16.9	16.2	15.6	14.3	13.7	12.7	11.0	9.2	8.3	7.1	-	-	6	25 mm	15.5
RSP-3A	5 x 2900	80 x 80	-	-	-	-	-	-	-	-	-	9.8	9	8.1	7.5	7	6	5.1	3.6	-	7.0
RSP-3	7.5 x 2900	80 x 80	-	-	-	-	-	-	-	-	-	15.2	14.9	14.3	13.9	13.3	11.8	9.9	7.6	5.0	14.5

• Performance are at 2900 RPM, 50 Hz and tested with Clear Water.
• Due to constant R & D activity, detail's are subject to change without prior Notice.

Advantages :

• Excellent quick automatic priming action without foot valve up to 8 mtrs.
• Automatic air release during priming.
• Back pull design, so easy maintenance without disturbing pipe lines.
• Dynamically balanced rotating parts ensure less vibrations.
• Better efficiency because of good hydraulic design.
• Non-clog impellers to handle solid particles up to 16 mm.
• Minimum parts, fast repairing at low cost, Also pump are available at economical rate.
• Available in Bare, Coupled, Mono block, Belt driven & Engine driven version.
• Also offered pump with trolley / trailer to move it from one place to another.
• Graded casting & perfect machining of all components ensure long life.
• ABLE TO OFFER PUMPS WITH CLOSED IMPELLERS FOR CLEAR LIQUIDS.
• Mono block pumps can be able to with stand with wide voltage fluctuations.
• Less expensive & easily available spares.
• Pumps can be fitted with mechanical seal as per customer's requirements.

Applications :

• Public utilities : For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.
• Dewatering Basements, Trenches, Construction sites.
• Onboard shift, as bildge, for desk wash & engine cooling.
• Industrial : Petroleum product, Ceramic product, Chemicals, Thermal plants etc.
• Tiles & Marble factories, effluent plants.
• Marine Works: Handling liquids from docs, ports and vessels etc.
• Salvage Operations : Fire fighting.
• Mobile Machinery : Cooing water for marine engines and shovels.
• Any application where priming is to be avoided

Note : Special Pumps for Higher Capacity and Head available on request.

Vertical self priming pumps

Design Features :

• High head low capacity pump.
• Available in S.S.-316 INVESTMENT CASTING and Cast Iron with all wetted parts of S.S.-316.
• Excellent for handling solvents from barrels and from tank farms to the charging vessels.
• Seal leakage can easily be detected from window in priming chamber.
• Pump can take negative lift from 3 to 5 meters.
• Maintenance is easier, Drain arrangement is standard.
• Compact design - requires less space, No grouting required

Range Of Product:
Capacity upto .............................. 12 m³/hr
Head upto ................................... 35 m.
Power upto ................................. 5.5 KW

Advantage at a glance :

• Low NSPH required
• Life lubricating bearings, covered from both the ends so minor leakage from pump side does not affect bearings.
• Being a low speed (1450 RPM) pump, Less Maintenance is needed.
• Installation is easier since motor required is vertical flange type and is directly coupled to the pump, coupling alignment is simpler.
• Low overhang shaft arrangement giving minimum deflection at the seal faces.
• Floating type impeller reduces noise and vibration.
• Available only with mechanical seal (internal mounted), rotary faces of Carbon and Glass Filled Teflon (GFT) are optional.
• Seal cooled and flushed by process fluid itself.
• Minor leakage at suction side does not affect pump performance.
• Biggest advantage from installation point of view is that since it is an "in line" type pump, it can be fitted as a valve and hence it will not require any suction or delivery piping effort.

Self priming Centripetal pumps

Technical Specifications:

Technical detail	RPP-25	RPP-40
Capacity (M3/Hr)	0-4	0-6
Total Differential Head (M.W.C.)	0-20	0-28
Speed (R.P.M.)	1450	1450
Motor (H.P.)	2	3
Motor Speed (R.P.M.)	1450	1450

All parts made in investment casting to give superior hydraulic performance

Advantage

• Centripetal self-priming pumps with turbine type impellers.
• Excellent for solvents tank farms.